Ultimate Guide to Reset Orbi to Default Settings

Article ads

In this technology era, Netgear Orbi is a popular device. In addition, they improve the WiFi signal speed and eliminate the dead zone areas. But, sometime many users are experienced network and security related problem. Due to these problems many customers are not able to access the Orbi login page. If you are also face this issue and find a solution then this post is for you.

Steps to Reset Netgear Orbi

There are two ways to reset the Netgear Orbi to its factory default settings. You can use any of the methods that we discussed below.

  • Using Reset button
  • Using Web GUI

Netgear Orbi Reset via Reset Button

The very first method to reset the Netgear Orbi is by using the Reset button. This is one of the straightforward ways to reset it. If you have no idea how to reset the Orbi then walk through the steps given below:

  • First of all, get your Netgear Orbi router and plug it into the wall outlet.
  • As soon as the Netgear Orbi LED lights are stable, look for the Reset button.
  • Once you find it, take a sharp pointed object and press it gently.
  • Now, hold on a little while and release the button.

Congratulations!  You can reset the Orbi device to its factory default settings. But, sometimes many users fail to execute this process. If you are also one of them then try the next method.

Netgear Orbi Reset via Web Interface

The approach to resetting the Netgear Orbi device is quite simple using the manual method. If you are not sure how to reset it then below is the process explaining how to execute the whole process.

  • Power on Your Orbi

Initially, plug the Netgear Orbi power adapter into a well-working wall outlet and turn it on. Wait for a couple of seconds till the power LED light turns on.

  • Connect the Devices

Now, connect the Orbi router to the existing modem. For this, grab an Ethernet cable and attach one end to the router and another end of the cable to the modem.

  • Open a Web Browser

As soon as a strong connection is established between the wireless devices, power on your client device. Thereafter, head over to an internet browser such as Google Chrome, Brave, IE, or Mozilla Firefox. But, make sure that the browser you use is updated one.

  • Access the Web Address

Now, in the URL bar of the browser type the default web address. The default web URL is Apart from this, you can also use an IP address to access the routerlogin page. To get accurate results always use the location field rather than the search bar.

  • Input Admin Credentials

The moment you press the Enter key, the Netgear Orbi admin window will display on the screen. Here, type the default login values. Just in case you are not sure about the username or password then take the assistance of the user manual.

  • Perform Factory Reset

Once you log in, the BASIC Home screen will appear. Here, click on the Advanced option and then go to the Backup settings. Here, click on the Erase and then yes. Wait for a couple of minutes to complete the process.

Once the Netgear Orbi device is reset to its factory default mode, you need to configure the Orbi device once again. On the off chance you are not able to reset the Orbi router then follow the section given below:

Can’t Reset Netgear Orbi Device

There are plenty of causes where your Netgear Orbi device can’t reset. Here is a list of some common issues:

  1. Wrong Reset Process

It is essential to follow the correct procedure for performing a factory reset on your Orbi device. The reason being is each Orbi model may have a different reset method. To overcome this issue it is important to refer to the user manual for precise instructions.

  1. Insufficient Reset Duration

Most of the time users may not press the reset button for an adequate amount of time, resulting in an incomplete reset process. To fix this issue, hold down the reset button for the recommended duration of time.

  1. Firmware Issue

Hardware or firmware problems also create issues at the time of the factory reset process. To troubleshoot this issue, it is suggested to check if any new firmware update is available.

In the End

With that! Our guide to how to reset the Netgear Orbi device has come to an end here. We hope that with the help of this post, you can easily fix the issue in a trouble-free way. If you liked reading this article then do not hesitate to give a word of appreciation in a comment section.

Raiden Wright

I am Raiden Wright. In addition to my formal education in English Literature and Communications from a prestigious university, I have also pursued continuing education courses related to copywriting as well as Search Engine Optimization (SEO)

Related Articles

Leave a Reply

Your email address will not be published. Required fields are marked *

Back to top button